Dee Zee DZ371239 User Manual
Page 4
OVAL BEND SIDEBAR
02-08 DODGE RAM 1500/03-08 RAM 2500/3500 QUAD CAB
Page 3 of 3
1/28/10 Rev1 (DP)
Passenger Side Installation Pictured
10mm Bolt Plate
10mm Lock Washer
10mm Flat Washer
(Fig 4) Passenger Side Front Support
Bracket installation pictured
1/2” x 2” Hex Head Bolt
1/2” Lock Washer
1/2” Flat Washer
Complete installation
(Fig 5) Passenger Side Rear Support
Bracket installation pictured
Factory Body Mount Bolt with provided
13mm x 68mm OD Large Flat Washer
Fig 3
Front
Rear
IMPORTANT! Depending on model year, there may
not be a factory washer and/or the factory body mount
bolt may be too short for proper Support Bracket
installation. If necessary, replace the factory body
mount bolt and washer, (if washer is supplied), with
the provided 12-1.75mm x 120mm Hex Bolts and
13mm x 68mm OD Large Flat Washers. If the factory
bolt is long enough but there is no factory washer, use
the provided 13mm x 68mm OD Large Flat Washers
to mount the Support Brackets, (see Figure 4 & 5). It is
the installer's responsibility to determine the correct
hardware for proper installation.
Factory Body Mount Bolt with
provided 13mm x 68mm OD
Large Flat Washer