Dee Zee DZ372521HD - Manual (Page 3)

3" SIDEBARS BODY BOLT MOUNT
2014 SILVERADO/SIERRA 1500 DOUBLE CAB
Page 2 of 3 9-17-13 (DP)
7. Level and adjust the Sidebar, tighten all hardware and check all mounting locations for
clearance between factory steel body mount brackets and Mounting Brackets. Once satisfied
with fit, tighten all hardware.
8. Repeat Steps 1 - 7 for passenger Sidebar installation.
9. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish.
Mild soap may be used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver side installation pictured
(Fig 1) Front Mounting Location
(Fig 2) Driver side front Bracket pictured
Factory welded steel body mount bracket
Factory body bolt
Front
(Fig 3) Center Bracket installation pictured
Factory body bolt
Front
Front