Appendix 2 product features, Appendix 3 faq – Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps User Manual
Page 69
64
Appendix 2 Product Features
Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, and IEEE 802.3u
standards.
High gain omni-directional antenna, with strong signals and long transmission
distance.
Wireless transmission rates up to 150 Mbps or 300 Mbps.
Provides one 10/100 Mbps auto-negotiation Ethernet WAN port to connect to the
Wide Area Network.
Provides four 10/100 Mbps auto-negotiation Ethernet LAN ports to connect to the
Local Area Network.
Supports Auto MDI/MDIX.
Supports xDSL/Cable modems with either static or dynamic IPs in a community
broadband networking.
Includes router, wireless access point, four-port switch, and firewall functions.
Supports WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK mixed security modes.
Includes a WPS button to initiate the WPS function.
Supports hidden SSID function and MAC address-based access control.
Supports WMM for improved multimedia and VoIP performance.
Supports SNTP.
Supports UPnP and DDNS.
Supports WDS to extend wireless network coverage.
Supports wireless WAN functionality and allows access to ISP's wireless hotspots to
share Internet access with multiple computers.
Supports virtual server and DMZ hosting.
Provides a system log to record the important router events.
Appendix 3 FAQ
This section provides some possible solutions to common problems, which may occur
during the router's installation or use. The instructions below may help you deal with the
problems. If your problem is not in the list, please log into our website
or send an E-mail to [email protected]
, and we will reply to you at the earliest time.
1. I am unable to access the router's Web-based Utility after entering the IP address
in the address field of my browser.