Monoprice PID 8742 Wireless 802 11N Router with Internal Antenna and WPS Function 2T2R MIMO 300Mbps - Manual (Page 35)

30
Chapter 5 WLAN Settings
5.1 Wireless Basic Settings

Enable wireless function: When selected it enables the router's wireless features.
When not selected, all wireless features and functions are disabled.

Wireless Working mode: Select between the two possible wireless modes:
Wireless Access Point (AP) and Network Bridge (WDS).
Wireless Access Point (AP)

Network Mode: Select one of the modes from the drop-down list:
11b mode
11g mode：Use this mode if you have only Wireless-G clients in your network.
：Use this mode if you have only Wireless-B clients in your network.
11b/g mixed mode: Use this mode if you have only Wireless-B and Wireless-G
clients in your network.
11b/g/n mixed mode: Use this mode if you have Wireless-B, Wireless-G, and/or
Wireless-N clients in your network.
 Primary SSID: This is a unique name used to identify the network and is required.
 Secondary SSID: This is another unique name, which must be different from the
Primary SSID, and which serves as an alternative identifier. The Secondary SSID is
optional.
 Broadcast (SSID): Select Enable to allow the router's SSID to be broadcast, which
allows other wireless devices to find it by scanning. When disabled other wireless