American Audio Radius 3000 - Manual (Page 35)

© American Audio ® - www.AmericanAudio.us - Radius 3000™ Instruction Manual Page 35
MAIN PLAYER:
1. Press the folder knoB (20) to enter the internal menu.
2. Once you are in the internal menu, turn the folder
knoB (20) until MIDI SETUP is displayed.
3. Turn the either the time knoB (31) or ratio knoB (25) until
the USB = LINK is displayed, and press the folder knoB
(20) to save the setting and exit.
4. Now load your USB device into the MAIN PLAYER.
5. Connect the MAIN PLAYER using the rear USB port to the
second players top USB port. See Figure 55.
6. You should now be able to access the main players loaded
USB device using the second players controls.
With this function a USB devide can be loaded into one Radius 3000, and played by a connected
Radius 3000. Follow the directions below to setup the link function. This function cannot be used
with the CD Player.
Figure 55
RADIUS 3000 LINk Up
mAIN pLAYER (with loaded USB Device
SECOND pLAYER
Figure 56
USB Cable
WARNINg: It is recomended that the USB Cable be
at least 28 gauge or higher and no more then 3 feet
long.