Monoprice 9206 Pan/Tilt/Zoom IP Camera - Manual (Page 29)

Pan/Tilt IP Camera
username and password fields could be left empty if no authentication is needed
for the SMTP server.
7. SMTP server test – after the settings are filled, you could press “SMTP server test”
to check if all the settings are correct.
8. Send FTP message – if this item is enabled, the IP Camera will send out a jpeg
picture file to the specified ftp account.
9. FTP server – this is the FTP server address to receive the jpeg file.
10. FTP username/password – this is the username/password to login into the FTP
server, so, this triggered jpeg file will be allowed to reach this FTP server.
11. Remote folder – the jpeg file will be put under this folder of the FTP server.
When this modification is “Save&Apply”ed, it works immediately, but all the
connected video viewing users will be disconnected.
The default setting is “Disable”.
Figure 3-13: Email/FTP Alarm page
29