Monoprice 9204 IP Camera - Manual (Page 40)

MPEG-4 wired/wireless IP Camera
3.17. Set to factory default
For some reason, for example you forgot the web login password, you may want
to set the IP Camera to the factory default settings. The only thing you need to do is
using a stick to press the “reset” button on the back of the IP Camera body for more
than 4 seconds and release it, do this when the IP Camera is powered on. The IP
Camera will reset to the factory default settings and restart automatically.
The web login account will be “admin” (no password), the play-video password
will be “ipcam” after reset to factory default.
Figure 3-24: Stick on the reset button to set to the factory default
40