Safe mode – Monoprice 9204 IP Camera User Manual
Page 39

MPEG-4 wired/wireless IP Camera
3.16. Safe
Mode
If by some abnormal operation, for example, powered off during the critical point
of the upgrade procedure, the IP Camera will enter into the safe mode. In this mode,
you will see the following “Safe mode” page when login into this IP Camera. Please do
the upgrade operation immediately to recover the system. On this safe mode, the IP
Camera can not display the video on the CamView software, but you can still find this
IP Camera on the “Auto search” list.
The steps to recover from “safe mode” are the followings :
1. Use CamView to locate the IP Camera by clicking the “Auto Search” item on the
CamView software.
2. Login into the web configuration page of the IP Camera.
3. Upgrade the firmware from the “Upgrade” page.
Figure 3-23: Safe mode information page
39