Monoprice 6977 17-inch Professional CCTV Monitor - Manual (Page 24)

Signal Connector instruction
17”/19” User’s Manual
19
3.1 Signal Connector
1
2
3
4
5
6
7
8
9
1
Audio OUT (RCA Jack): audio output terminal
2
Audio IN (RCA Jack ) : audio input terminal
3
S-VIDEO OUT (BNC): connect to the output
terminal of other video equipment
4
S-VIDEO IN (BNC): connect to the input
terminal of video equipment, such as a VCR or
a color video camera
5
BNC OUT: connect to another BNC output
terminal of camera VCR or other video
equipment
6
BNC IN: connect to another BNC input
terminal of camera VCR or other video
equipment
7
VGA IN: connect to an analogue R.G.B output
terminal, such as a display card output VGA
terminal of the personal computer
8
DVI IN: connect to a DVI cable
or
HDMI IN: HDMI input terminal
9
Power connector: plug head of power cord into
a wall socket

Note:

※ It takes about 2~3 seconds to change mode.

※ When you choose a video signal screen without connecting any video signal, on
screen will show



Caution:

AVOID directly pulling any cable when disconnecting devices from the monitor.
Always disconnect the devices carefully by firmly gripping the metal or plastic
connector body and gently easing the connector from its socket.