Monoprice 6977 17-inch Professional CCTV Monitor - Manual (Page 19)

Operation Instruction
17”/19” User’s Manual
14
PIP Setup Submenu
※Remark: For this selection, there will be a difference in the source value according
to the I/O interface you choose.
※Remark: Under the PIP function, if one of the sources is in VGA, the display will
not auto adjust.

Composite/ S-Video/ HDMI OSD Menu and definition of functions
* Above value/data is for reference only. It will change without notice
Composite and S-Video – Picture
Menu Value Definition of functions
Source (See Remark) Press (+) or (-) to choose sub screen
Multi picture None, Small, Middle, Large, POP Press (+) or (-) to choose PIP Mode
PIP Swap Under PIP mode, press (+) to co-switch screen
Menu Value Definition of functions
Brightness 0~100 Adjust back ground black level of the screen
image
Contrast 0~100 Adjust fore ground white level of the screen
image
Sharpness 0~100 Adjust the clarity and focus of the screen image
Hue
(COMPOSITE AND
S-VIDEO NTSC Only)
0~100 Adjust of color tint
Color 0~100 Adjust the color density
Display Mode Full, 4:3, 16:9, Over, Under, 1:1 Adjust the display mode
Color Temp Warm/Cool/User Press (+) or (-) to choose the types of color
temperature: warm, cool or user
Color Temp R 0~100 Adjust the red color’s intensity of the screen
image
Color Temp G 0~100 Adjust the green color’s intensity of the screen
image
Color Temp B 0~100 Adjust the blue color’s intensity of the screen