Monoprice PID 8122 HDMI Extender Using Cat5e or CAT6 Cable Extend Up to 328ft User Manual
Page 6
Extend HD AV to 100m over one Cat5e/6 CABLE
５
①DC/5V
②Power Indicator
The LED will turn on once the DC/5V provided.
③Link
When LED is ”ON”, it indicates HDBaseT link connection established between
the Sender and the Receiver over the Cat5e/6 cable.
④HDCP
When the LED is ”ON”, it indicates a video content with HDCP protection is being
transferred.
When LED is “Blinking”, it indicates a video content without HDCP.
When LED is “OFF”, it indicates no video is connected.
⑤HDBaseT
Connect the Sender to the Receiver using a Cat5e/6 cable.
⑥ IR
Connect Extender infrared receiver cable from this port to receiver the IR
command of the source
⑦ HDMI Out
Connect HDMI Sink to this Port