Monoprice PID 8048 HT3D-110 - Manual (Page 4)

4
Main Unit Operation
 Select Key:
- Modes Selection: If you want to change each mode manually, you can press the
“Select”
key to change. A LED will be lighted up for the mode indication.
 3D-Effect Key:
- Press the
“3D-Effect” key to adjust the level of 3D effect
- This key is only functional in the 2D to 3D conversion
- There are three levels to adjust
 Power/Reset Key:
- Press the
“Power/Reset ” key once to reset the main unit
- Press the key for 3 second to power off the main unit
 The procedure is a cyclic function:
- When you selected the mode, there will be a LED on to present the mode. If you select
mode 1, the mode 1 LED will light on.
APPLICATIONS
2DTV Application (Mode 1 & 3)