Lan ip address, Dhcp server, 49 dhcp server – Actiontec electronic GT701WRU User Manual
Page 54
48
Actiontec 54 Mbps Wireless Cable Router User Manual
49
Chapter 4 Using Advanced Setup
LAN IP Address
Selecting LAN IP Address in the “Configuring the Advanced Settings” screen gen-
erates the “
LAN IP
Address” screen.
The values in the
“LAN IP
Address” and “Netmask” text boxes are the
IP
address
and Subnet mask of the Router as seen on the network. These values can be modi-
fied for your
LAN
network, but Actiontec recommends keeping the default factory
settings (
IP
address
192.168.0.1;
Subnet mask
255.255.255.0
).
☞
Note: If the Router’s
LAN IP
Address is modified, ensure the
DHCP
Server range is within the same subnet. For more infor-
mation, see “
DHCP
Server Configuration.”
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting
DHCP
Server in the “Configuring the Advanced Settings” screen gener-
ates the “
DHCP
Server” screen. The Router has a built-in
DHCP
(Dynamic Host
Configuration Protocol) server that automatically assigns a different
IP
address to
each computer on the network, eliminating
IP
address conflicts.
The factory default setting is On. To disable the
DHCP
Server, select Off.