Actiontec electronic GT701WRU User Manual

Page 48

Actiontec 54 Mbps Wireless Cable Router User Manual

Chapter 4 Using Advanced Setup

Specify a Static IP Address

Select this option if the

ISP

service is configured to use

RFC

1483

Bridged or Routed

using a Static

Address. Enter the

Address, Subnet Mask, and Default Router

Address provided by the

ISP

in the “Broadband Connection via Static

Address”

screen, which causes the

address and routing information to terminate at the

Router, as opposed to the

address and routing information being bridged to ter-

minate at the computer. This allows the use of the router capabilities for the Local
Area Network (

LAN

☞

Note: Contact the

ISP

if unsure of the proper configuration.