Monoprice 6517 Wall Mount Bracket - Manual (Page 6)

6 of 8
Mounting the Assembly Adapter Plate to screen
Modify the Adapter Plate
Modify the Assembled Adapter Plate
Slide the adapter brackets into Assembled adapter plate slightly.
Place the Assembled Adapter Plate on the back of the display with
one Adapter Bracket aligned with a set of vertical mounting
holes.Then,slide the other Adapter Bracket in or out until it aligns
with the second set of vertical mounting holes.The Adapter should
be horizontally centered on the back of the flat panel display.
Adaptor and hooks Use four M8x16 screws and four washers
and tighten it with Phillips Head Screw Driver.
NOTE ˖There are five positions to choose.
Adaptor and hooks
C
Top of
Display
For screen with a hole
pattern in a pocket spacers
go between Assembly
Adapter Plate and screen
Spacers
Mounting
Screw
M M
Washer Hole
Square
Washer
Note
Recessed Mounting Holes
If the mounting holes are
recessed into the back of the
display use the supplied spacers
to pack the recessed hole
If the mounting screw is M
screw is M use the Spacers .
Ensure that the brackets are
securely fixed to the display
Adapter
Bracket
M x
Screw
Metal Washer
㩪 x㩪 x