Monoprice 6518 Recessed Wall Mount Bracket - Manual (Page 7)

7 of 8
For Flat Back Screen
C.1
C.2
SCREEN
SCREW
SPACER
SCREEN
fig C.1.1 fig C.1.2
SCREW
AA
AA
OR
‡ Do not tighten screws with excessive force.
Overtightening can cause damage to mount.
CAUTION
‡ Do not lift more weight than you can handle. Use
additional man power or mechanical lifting equipment
to safely handle placement of the screen.
WARNING
Insert two screw bolts( A.B.C.D or E ) into swivel box
on adapter plate as shown in fig.C.2.1Leave approx.
1/4" of exposed thread.
Select the small,medium,large or extra large screws from the baffled .fastener pack then attach
screen brackets(AA) to screen following figure C.1.1 or C.1.2 on page 7.
Lift the display and hook it over the mounting head
by lowering the exposed portion of the top screws
down the open key slots.
Once in position, attach the bottom two screws
bolts(A.B.C.D or E ) to secure the display to the
mounting head as shown in fig.C.2.2
fig.C.2.1
fig.C.2.2
top screw
0.25"
( A B C
D or E )