beautypg.com

Aa(mount) – Monoprice 5919 Wall Mount Bracket User Manual

Page 7

background image

7 of 8

top screw

Attach Assembly Adapter Plate to Assembly Arm

.25"

Iron spacer

washers

M8x15mm

screw bolt

M8x15mm

screw

1. Insert two M8x15mm screws
and two metal washers into swivel box
on Assembly Adapter Plate as above
shown.
Leave approx. 1/4" of exposed thread.

NOTE:This procedure will require
two persons.Ensure that the arm is
set to its maximum negative tilt prior
to attaching the display

2. Lift the display and hook it
over the mounting head by lowering
the exposed portion of the top screws
down the open key slots.

3. Once in position, attach the bottom
two M8x15mm screws and two
washers to secure the display to the
mounting head using M5mm Allen
Wrench.

For Flat Back Screen

SCREEN

SPACER

SCREEN

fig C.1

fig C.2

SCREW

AA(mount)

OR

Select the small,medium,large or extra large screws from the baffled .Fastener pack then attach
screen brackets(AA) to screen following figure C.1 or C.2 on page 7.

SCREW

AA(mount)