Monoprice 3408 3-port DVI KVM Switch User Manual

Page 8

5.3.2 Single Audio ( Speaker + Microphone ) Selection

Hot Key:

[Scroll] → [Scroll] → [A] →[Enter] to enable or disable the audio auto switch mode

[Scroll] → [Scroll] → [A] → [1]→ [Enter] to select PC1 Speaker and Microphone

[Scroll] → [Scroll] → [A] → [2]→ [Enter] to select PC2 Speaker and Microphone

[Scroll] → [Scroll] → [A] → [3]→ [Enter] to select PC3 Speaker and Microphone

Note 1: Audio auto switch mode, the default setting of KVM switch is enabled,

means when you used the push button, the PCs and Audio will be

switched at the same time. In case of the Audio auto switch mode is

disabled, then the push button only switch PCs.

Note 2: One long sound – Audio auto switch disabled

Two short sound – Audio auto switch enabled