Monoprice 3408 3-port DVI KVM Switch - Manual (Page 6)

6
You can synchronize the PC selection, by using the following two-step Hot Key
sequence. To send commands to the Combo Free DVI KVM Switch, press the
[Scroll] key twice (Step 1), then press key [1] or [2] or [3] and [Enter] (step 2) to
assign the PC to a particular PC. ( If you press key [1] or [2] or [3] on the
number pad, the keyboard, mouse & video will also be switched
synchronously )
5.2.2 Auto-Scan Function
Hot Key:
[Scroll] → [Scroll] → [S] → [Enter] to BEGIN.
[Scroll] → [Scroll] → [S], → [Enter] to STOP.
You can activate the Auto-Scan function by using the following two-step Hot Key
sequence. To send commands to the Combo Free DVI KVM Switch, press the [Scroll]
key twice (Step 1), then press [S] and then press [Enter] (Step 2). When you press
the Auto-Scan hot key sequence, the Combo Free DVI KVM Switch alternates
between the three PCs and displays them on the monitor.
Each PC is display one of time interval from 5 ~ 250 seconds (The interval is
adjustable) before switching to the next. When you press the Auto-Scan Hot Key
sequence again, the Auto-Scan will stop and the monitor screen will jump back to the
original PC.
Adjustable scan time interval setting ( 5 ~ 250 sec. )
Hot-key: Pressing the , then and <10 ~250 >