Asus DELUXE P8Z77-I - Manual (Page 160)

4-54 Chapter 4: Software support
Chapter 4
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press . The following
screen appears:
2. Enter a name for the RAID set and press .
3. When the RAID Level item is selected, press the up/down arrow key to select a RAID level to
create, and then press .
4. When the Disks item is selected, press to select the hard disk drives you want to include in
the RAID set. The SELECT DISKS screen appears:
The utility supports maximum four hard disk drives for RAID configuration.
The navigation keys at the bottom of the screen allow you to move through the menus and select
the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
Intel(R) Rapid Storage Technology - Option ROM - v10.5.1.1070
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[ ↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done