Audiovox P-88 - Manual (Page 4)

-3-
To check the time with the vehicle ignition switch in the “off”
position, momentarily press the Select button. The display will
illuminate and show the time and then automatically shut off after
5 seconds.
4
BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the
Select button
3
so that the level number above the “BASS”
indication is flashing. Within 5 seconds of choosing the Bass
mode, press the + or - button of the Level control
2
to adjust the
bass response as desired. The bass level will be shown on the
display panel from a minimum of -7 to a maximum of 7 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5
TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the Select button
3
so that the level number above the “TREBLE”
indication is flashing. Within 5 seconds of choosing the Treble
mode, press the + or - button of the Level control
2
to adjust the
treble response as desired. The treble level will be shown on the
display panel from a minimum of -7 to a maximum of 7 (0 is flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the Select button
3
so that the “bAL” indication
appears on the display panel. The display will then change to
indicate the balance control position. Within 5 seconds of
choosing the Balance mode, press the - button of the Level Control
2
to adjust the stereo balance to the left channel speakers or the
+ button to adjust it to the right channel speakers. When the
volume level between the right and left channels is equal, “0-0” will
be shown on the display panel. Adjusting the balance toward the
right will increase the number on the right side of the display to a
maximum of “0-9” (full right). Adjusting the balance toward the left
will increase the number on the left side of the display to a
maximum of “9-0” (full left). The display will automatically return to
the normal indication 5 seconds after the last balance adjustment
or when another function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the Select button 3 so that the “FAd” indication
appears on the display panel. The display will then change to
indicate the fader control position. Within 5 seconds of choosing
the Fader mode, press the + or the - button of the Level Control
2
,
to adjust the front-rear speaker levels as desired. When the level
of the front and rear speakers is equal, “0-0” will be shown on the
display panel. Adjusting the fader toward the front speakers will
increase the number on the left side of the display to a maximum
of “9-0” (full front). Adjusting the fader toward the rear speakers will
increase the number on the right side of the display to a maximum
of “0-9” (full rear). The display will automatically return to the normal
indication 5 seconds after the last fader adjustment or when
another function is activated.