Installation – Alpine CRA-1667RF User Manual

Page 21

-EN

Installation

Installing the Remote Display Unit

CAUTION:

Do not install the remote display unit near the air-bag of
the front passenger's seat.

• Check the installing location.
• Determine the installing location on the dashboard

(in the center, and flat position).

•Installation using Velcro tape

• In case of installing the remote display unit with the

Velcro

tape attached, cut the tape into two pieces.

1. Without separating the two pieces of Velcro tape,

peel off the paper backing on one side and place on
the back of the remote display unit.

Note

Take care not to cover the caution label on the remote display
unit with the tape.

2. Make sure the location selected is free from

moisture or dirt. Peel off the backing paper from the
other side of the Velcro tape on the Remote Display.

3. Place the remote display unit on the installing

location and push the unit to fix securely.

•Installation using flush mount

1. After determining the installing location, install the

flush mount with screws (M2.9 x 20).

2. Insert the remote display unit into the flush mount to

lock securely.

NOTE

To remove the remote display from flush mount, please use thin
plate such as a plastic card to insert to either side of the remote
display carefully. Then the remote display will be released.

•Installation using flush mount and

bracket mount

1. Make a hole to match the external dimensions of

bracket mount on the installation location of the
dashboard.

2. Insert the remote display unit into the flush mount to

lock securely.

3. Insert the remote display unit and flush mount

combined into the bracket mount and fix them.

4. Insert the remote display unit, flush mount and

bracket mount combined into the hole made at step
1 and fix them.

Installing the FM Modulator Box

The FM Modulator Box can be mounted to any flat
surface using the Velcro tape.

Velcro Tape

Flush Mount (included)

Dashboard

Tapping Screws (M2.9

× 20)

(Included)

Flush Mount (Included)

Dashboard

Bracket Mount (Included)

Velcro Tape
(Included)