Alpine CRA-1667RF - Manual (Page 14)

12
-EN
XM Radio Operation (Optional)
Receiving XM Channels with the XM
Receiver
XM Satellite Radio* is the next generation of audio
entertainment, with up to 100 brand-new digital
channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-
coast via satellite. For more information, visit XM’s
website at www.xmradio.com or call 1-877-XMRADIO.
An optional XM Satellite Radio Receiver (TUA-T020XM)
may be connected to the CRA-1667RF if it is Ai-NET
compatible. With an XM Receiver connected to the Ai-
NET input of the CRA-1667RF, the XM Receiver will be
controllable from the CRA-1667RF.
* XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
NOTES
• The controls on the CRA-1667RF for XM Receiver
operation are operative only when an XM Receiver is
connected.
• The XM1 or XM2 band illuminates when in XM mode.
1
Press the SOURCE button of the Remote Display or
the Remote Control to select RADIO Mode.
2
Press the BAND button on the Remote Control to
select XM1 or XM2.
3
Turn the rotary encoder of the Remote Display, or
press the g or f button of the Remote Control to
select the desired channel. Holding the ( or )
button of the Remote Display, or holding the g or
f button of the Remote Control will change
channels continuously.
NOTE
You can press the ( or ) button of the Remote Display to
select the desired channel.
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID
number for your XM Radio Receiver in order to
subscribe to XM's programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the CRA-
1667RF in the following way.
It is displayed only when an XM Satellite Radio Receiver
(TUA-T020XM) is connected.
1
While receiving XM1/XM2, turn the rotary encoder of
the Remote Display or press the g or f button of
the Remote Control to select channel “0”.
NOTE
You can also press the ( or ) button of the Remote
Display to switch the channel.
2
The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
3
To cancel the ID number display, set the channel to
other than “0.”
TIPS
There is another way to display your ID number.
1. Press and hold the SETUP button of the Remote Display or
the Remote Control for at least 2 seconds.
2. Turn the rotary encoder of the Remote Display, or press the
8 or 9 button of the Remote Control to select “RADIO ID”.
3. Press the ( or ) button of the Remote Display, or the
g or f button of the Remote Control to display your ID
number.
4. After checking your ID number, press the SETUP button of
the Remote Display or the Remote Control to return to the
normal display.
NOTES
• You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.
• You can check your ID number printed on the label on the
package of your XM Satellite Radio Receiver (TUA-T020XM).
Rotary encoder (
)
g f
DISP/
SETUP
8
9
SOURCE
SOURCE
-/J
DISP/SETUP
BAND
3 4