Aurora Electronics MAGNETEK PVI-3600-OUTD-UK-F-W - Manual (Page 15)

Installation and Operator’s Manual Page 15 of 63
(PVI-3600-OUTD-UK-F-W Rev.: 1.0)
Control of the internal temperatures to automatically drive the speed of the
external cooling fan. This will allow the inverter to deliver the maximum
output power for ambient temperatures up +40 ° C .
The AURORA is designed for safe and reliable operation. This is made possible
by the use of redundant control circuits.
2.5 System Design:
The overall system design of a wind system is critical to successful
operation and maximizing energy production.
Step 1:
The first step is determining the wind resource at a location is a site
survey and possible wind monitoring.
Step 2:
The second step is purchasing a pre-designed wind system that
includes the Aurora Wind inverter with a turbine specific power
curve.
A wind turbine model specific power curve is pre-programmed into
the Aurora Wind Inverter. The wind power curve is used by the
Aurora Wind Maximum power point tracking algorithm to product
the maximum amount of available energy.
Step 3:
The third step a proper installation of the entire wind energy system.
3 INSTALLATION
WARNING: The electrical installation of AURORA must be made in
accordance with the electrical standards prescribed by the local
regulations and the National electrical standards.