Yetter 2967-007 U.N.T. Residue Manager - Manual (Page 11)

11
INSTALLATION INSTRUCTIONS
STEP 8. Choose the mounting hole in which to attach the residue manage wheels. Both
wheels mounted in the front holes – wheels are interlocked. One wheel mounted in the
rear hole – wheels are offset. Both wheels mounted in the rear holes – wheels are
spaced apart. Torque 150 ft.lbs.
STEP 9. Check the alignment of the residue manager wheels, conservation coulter (if
used) to the planter opener blades. Fully tighten mounting bolts. Torque to 85 ft./lbs.