Adder Technology X50 - Manual (Page 9)

wel
c
ome
c
ontent
s
inst
all
ation
op
era
tion

r
t

er
in
orma
tion
Connections at the remote module
1 Place the remote module adjacent to the user location. 3 Attach the leads of up to four
USB devices (two of which are
usually a keyboard and mouse)
to the sockets located adjacent
to the video output connector.
To video
monitor
4 [MS2 variant only] Optionally attach
a serial device lead to the male
serial connector on the remote
module.
REMO
TE
AD
D
2 Attach the lead from the video
monitor to the video out socket
on the remote module.
[MS2 variant only] Optionally
attach the lead from a second
video monitor to the upper video
out socket on the MS2 remote
module.
To secondary
video monitor
REM
OTE
AD
D
To USB devices,
e.g. keyboard,
mouse, etc.
To RS
serial device
See the Important note on page 5