Tivax HiRez 9″ TV User Manual - Manual (Page 13)

Ⅳ. Menu Operation
2
13
Figure 6
. CH Setup
p menu (Figure 5).
Skip / unskip a channel;
In the Main menu, select CH Setup item and press the
RIGHT key to enter Channel Setu
·
·Skip / unskip a channel
If you want to skip a channel while pressing CH+/- key,
1>
Figure 5
use this menu, following these two steps:
Use the UP/DOWN key to select Channel item, then
press the RIGHT key to select the channel you want
to skip
2>
ress the RIGHT key to skip current s
on about
ow to set Closed Captioning (CC608/CC708).
T key to enter
2>
press the RIGHT key to change current item setting.
adcast, CC Customer is
rayed-out and cannot be edited.
t CC setup menu is as follows:
Use the UP/DOWN key to select the Skip item in the Channel
Setup menu and p elected channel (turns Skip function on or off).
3. CC Setup
In this section, you will get enough informati
h
1> Use the UP/DOWN key to select CC Setup item in
the main menu, and press the RIGH
into the CC Setup menu (Figure 6).
Use the UP/DOWN key to select a sub item, and
If you don’t want to display the CC when viewing
programs, you can set CC Display Off by pressing CC on RC.
If you don’t want to change the CC style of current
programs, you can set CC Mode to Broadcast mode as
Figure 6. When CC Mode is Bro
g
The default value abou
CC Display: On;
608CC Type: C1;
708CC Type: Service 1;
CC Mode: Broadcast;