Tivax HiRez 9″ TV User Manual - Manual (Page 12)

Ⅳ. Menu Operation
1. Auto Search
Use the Auto Search function to scan for channels
during initial setup.
12
1> Use the UP/DOWN keys to select Auto Search in
the Main menu.
2> press the RIGHT key to enter into the Auto
Search Menu, on Source Type use RIGHT
select Antenna or Cable,
3> Use the UP/Down keys to select Start Search
then press RIGHT key to start. The TV will
search for channels automatically. (Figure 3).
Figure 3
After the scan is complete, the new found channels will be added to the channel list and the TV will turn to
full-screen mode
During the searching, you can press the LEFT key to
stop. When auto search is completed or stopped, you
will see the information as in Figure 4
Also, you can press the EXIT key to exit auto
searching mode.
Figure 4