Spyder Auto PRO-YD-BMWE38 99-01 HID TYPE 7 Series - Manual (Page 3)

Install the Spyder turn signal socket if
the orignal does not fit, unplug the fac-
tory plug from the harness and plug the
new one on.
Install the Spyder Headlight back on to
the vehicle. Plug the Harness back on,
the halo/L.E.D. Wires is connect to the
Parking lights. These wires are optional
to your vehicle, you do not have to wire
them together.
Factory Xenon Headlight Spyder Projector Headlight using Factory Xenon Lights
STEP:
www.spyderauto.com