Sper Scientific 800106 Infrared IR Thermometer Gun 12:1 - Manual (Page 8)

MEASUREMENT PROCEDURES
1. Slide the Laser ON/OFF selector switch(8) to turn the
Laser Guide(5) on or off.
2. Slide the °C/°F selector switch(7) to the desired temp-
erature scale.
3. Point the IR Gun at the object to be measured, pull
and hold the Trigger (3) to obtain a continually updated
temperature.
4. SCAN(17) flashes on the display while the Trigger is
depressed.
5. Release the Trigger(3),HOLD(17) and the last temp-
erature reading is displayed for approximately six
seconds until the thermometer turns off.
Measure Temperature(Scan)
6