Sper Scientific 800057 Additional Sensor for Temperature Datalogger Set User Manual

Page 7

Text mode
Original mode

SPER 800057

INTV

SELECT

V. OPERATION INSTRUCTIONS

5.1 Setup
Date And Time Setup:

1. Hold buttons simultaneously for 3

seconds to enter date and time setup mode.

2. Press to select year, month, day, hour and

minute setup.

3. Press to set value on year, month, day, hour

and minute.

Note:

Be sure to reset the data and time after replacing battery.
The user can also setup the time through the PC software.
There is a button in the software directly synchronize the
setup to the PC.

SELECT

INTV