Sper Scientific 800057 Additional Sensor for Temperature Datalogger Set - Manual (Page 14)

SPER 800057
13
View : Open LCD display window.
Window : Arrange windows
Help : On line help.
• DataLogger
Connect the Temperature Recorder to the PC. Start
the SE345 software and select "DataLogger" from
main menu or click from tool bar to load recorded
data from the logger. There will be a progress indicator to
show the download progress. If error occurs, just click
"DataLogger" again. After the data was downloaded
completely, the top left hand side the widow will show
how many data sets were loaded and information for each
data set (start data, start time, recording rate and record
numbers).
For examples, the figure
below indicates that there
are two data sets. Set 1 has
1325 records and set 2 has
19349 records.
Note: It will transfer first data set to the graph on the
right hand side and list data after loading; you can click
other data set to view the graph and list of the data set
you select.
• Setup Logger
You can setup Logger from the software, just select “Setup”
from main menu or click from tool.