Sper Scientific 800043 Ultimate Thermometer - Manual (Page 7)

7
IV. SPECIFICATIONS
Type Range Res Accuracy (meter only)
PT 100 -200 ~ 850°C, -328 ~ 1562°F
0.1°
± 0.2%+0.5°C or 1°F
Type K -100 ~ 1300°C, -148 ~ 2372°F
Type J -100 ~ 1150°C, -148 ~ 2102°F
Type T -100 ~ 400°C, -148 ~ 752°F
Type E -100 ~ 900°C, -148 ~ 1652°F ± 0.2%+0.5°C or 1°F
Type R 0 ~ 600°C
601 ~ 1700°C
32 ~ 1112°F
1113 ~ 3092°F
1°
±1%+5°C
±1.5%+5°C
±1%+10°F
±1.5%+10°F
Infrared -20 ~ 400°C
-4 ~ 752°F
±3% rdg or ±3°C or ±5°F
(which ever is greater)
Note: Accuracy is tested within 23 ± 5°C.
Display 2" x 1
1/4
" (51mm x 32mm) and 1/2" (15mm) digits.
Sensor Types 1. Non Contact Infrared thermometer
2. Platinum PT 100 ohm (0.00385 alpha coefficient,
meets DIN IEC 751 standards)
3. Thermocouple probes: K, J, T, E, R
Circuit Exclusive microcomputer circuit with built-in linearity
correction function. The Pt 100 ohm's curve is stored
in the CPU circuit.
Laser Red laser light guide, less than 1mW meets EN60825
standards
Probe Input 1. PT 100 ohm probe: DIN 4 pin socket
2. Thermocouple probe: Standard 2 pin socket
Sampling
Time Approximately 1 second
Over Range
Indicator " - - - - "
Data Output RS232 PC serial interface
Operating
Temp/RH 32 ~ 122°F, 0 ~ 50°C and less than 80% relative humidity
D/S Distance-to-Spot ratio is approximately 7:1.