Sper Scientific 800021 RH/Temp SD Card Logger - Manual (Page 22)

- 22 -
MEASUREMENT
PROCEDURES
lower display.
Type K/J Thermometer
1. Press POWER to turn the meter
on.
2. Press and hold FUNC to cycle
through the options until “tP”
appears on the LCD. Release the
FUNC button.
3. Plug a thermocouple temperature
probe (type K or J) into the type
K/J thermometer socket. The
LCD will display the measurement
value from the temperature probe.
4. “K” or “J” appear on the LCD to
indicate the type of thermometer.
Note
When using the meter for the first
time, the meter will default to K type
thermocouple. See page 16 for
instructions on selecting the
thermocouple type.