Sper Scientific 800021 RH/Temp SD Card Logger - Manual (Page 14)

- 14 -
SETUP MODE
3. Press ▲ or ▼ to adjust the value.
Press ENTER to save the value.
4. Repeat Step 3 to adjust the
month, date, hour, minute and
second.
Note
This procedure adjusts the meter’s
internal clock. The internal clock will
function when the meter is turned off
but only when the batteries have
adequate power (not with low battery
power.)
Decimal Type
Although the decimal is commonly
expressed as the “.” symbol (such as
20.6 or 1000.53), some (European)
countries use a “,” symbol to
represent the decimal (such as 20,6
or 1000,53). The meter defaults to
the period symbol. To adjust:
1. Enter the decimal type function
from Setup Mode (see page 13).
“dEC” appears on the LCD.