Sper Scientific 840017 Laser Power Meter - Manual (Page 4)

- 4 -
Rev 08/20/04
5 YEAR METER WARRANTY
Sper Scientific warrants this product against defects in materials and work-
manship for a period of five (5) years from the date of purchase, and agrees
to repair or replace any defective unit without charge. If your model has since
been discontinued, an equivalent Sper Scientific product will be substituted if
available. This warranty does not cover damage resulting from accident, mis-
use, or abuse of the product. In order to obtain warranty service, ship the unit
postage prepaid to:
SPER SCIENTIFIC LTD.
7720 East Redfield, Suite 7, Scottsdale, Arizona 85260
(480) 948-4448, [email protected], www.sperscientific.com
Include a brief description of the problem along with your contact information.
Be sure to return your warranty card or register online within 10 days.
IV . SPECIFICATIONS
Wavelength beam range 635nm ~ 830nm
Beam power range 0.1mW ~ 5mW
Beam power selector 0.3mW, 1mW, 3mW, 5mW
Accuracy 1, 5mW+5% 0.3, 3mW+10%
for the 3 specific wavelengths
Photosensor Silicone photo diode
(sensor diameter 9mm)
Photosensor dimension 1”(D) x 4 3/4 ”(L)
23.5mm(D) x 120.5mm(L)
Approximate probe length 42” (1 meter)
Device dimension 5 3/4” (L) x 3 3/4” (W) x 1 1/2” (H)
14mm(L) x 98mm(W) x 35mm(H)
Power Source No batteries required as the meter
obtains power from the laser itself
PRECAUTIONS: When not in use, cover the Photosensor Head to keep the
lens clean. Measurement errors may occur if the lens becomes dirty. As
needed, use an alcohol swab to clean the surface. Protect your instrument
from water, shock, dust, heat and sunlight.
Laser light can be harmful to the eyes and/or skin, avoid exposure to the
beam and do not look directly into the light. Do not aim the light at the eyes of
other humans or animals. Do not aim the laser light into a mirror or reflective
surface where the light could be reflected into your eyes.