Sper Scientific 850023 Anemometer SD Card Logger - Manual (Page 16)

16
MEASUREMENT PROCEDURES
Air Velocity and Air Temperature
1. Press POWER to turn the meter on.
2. Plug the anemometer probe plug into the anemometer
probe input socket.
3. Press and hold FUNC to cycle through the options until
“An” appears on the LCD. Release the FUNC button.
4. Hold the probe handle and point the probe head toward
the air flow. The air velocity value appears on the upper
display and the air temperature value appears on the
lower display.
Note
Point the yellow dot indicator on the probe head toward the
air flow.
Type K/J Thermometer
1. Press POWER to turn the meter on.
2. Press and hold FUNC to cycle through the options until
“tP” appears on the LCD. Release the FUNC button.
3. The anemometer probe must be disconnected from the
meter to obtain accurate Type K/J readings.
4. Plug a thermocouple temperature probe (type K or J)
into the type K/J thermometer socket. The LCD will
display the measurement value from the temperature
probe.