Speedtech Clutch Master Bracket User Manual

Page 6

Text mode
Original mode

6 |

P a g e

3. We recommend an adjustable clutch pedal stop be installed on the floor of the
car to stop the pedal from bottoming out the clutch master cylinder. This is
necessary to avoid bending the shaft. A simple 3/8

” coupling nut bolted or welded

to the floor will allow you to adjust a bump stop or bolt and jam nut to achieve the
proper pedal travel.

Speedtech Performance USA LLC

2884 S River Rd. Bldg. A St. George, UT 84790

1-435-628-4300