ATEN CS-1754 CS-1758 - Manual (Page 48)

5. After you have made your device selection(s), Click Next to perform
the upgrade.
If you enabled Check Firmware Version, the Utility compares the
device’s firmware level with that of the upgrade files. If it finds that the
device’s version is higher than the upgrade version, it brings up a
dialog box informing you of the situation and gives you the option to
Continue or Cancel.
If you didn’t enable Check Firmware Version, the Utility installs the
upgrade files without checking whether they are a higher level, or not.
As the Upgrade proceeds status messages appear in the Status
Messages panel, and the progress toward completion is shown on
the Progress bar.
2003-11-14
42 CS-1754 / CS-1758 User Manual