ATEN CS-1754 CS-1758 - Manual (Page 18)

5. Repeat steps 3 and 4 for any other computers you are connecting up.
6. For each Second Stage unit, plug the power adapter cable into its
Power Jack, then plug the power adapter into an AC source.
7. Plug the First Stage unit’s power adapter cable into its Power Jack,
then plug the power adapter into an AC source.
8. Turn on the power to all the computers.
Note: The Power On sequence requires that all Second Stage units
be powered on first. After all the Second Stage units have
been powered on, then the First Stage unit must be powered
on next. After the Second and First stage units have been
powered on, the computers can be powered on.
F/W UPGRADE
NORMAL RECOVER
F/W UPGRADE
NORMAL RECOVER
Two Stage Installation:
2003-11-14
12 CS-1754 / CS-1758 User Manual