SIGMA ROX 5.0 - Manual (Page 27)

Page 27
opening the lap view
general roX 5.0 functions roX 5.0
www.sigmasport.com roX 5.0
5.4 Opening the lap view
1 Press and hold the middle button (
LAP
) for three seconds. ‘lap view oPen’
flashes on the display.
2 Press the Set
and
Mode 1
buttons to switch between the following values: lap
time, time since start, lap distance, distance since start, max. speed, max.
heart rate, calories.
the average heart rate, average cadence, and lap number are shown in the
top display segment. the average speed for the lap is shown in the middle
display segment.
3 Press the Reset and Mode 2 button to switch between the individual laps.
4 Press and hold the
LAP
button for three seconds to exit the lap view.
‘lap view close’ flashes on the display.
5.5 Stopwatch
1 Press the Mode 2 button to move to the stopwatch.
2 Press the
Set
button to start and stop the stopwatch.
If the stopwatch is running, the icon appears on the display.
3 resetting the stopwatch:
Press and hold the Reset button for three seconds.
5.6 Countdown
1 Press the
Mode 2
button to switch to the countdown.
2 Press and hold the Set button for three seconds. ‘countdown set’ flashes
on the display.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the Mode 1 button to move to the next digit.
5 Press the
Set
button to save your setting.
‘set oK’ appears on the display.
6 Press the
Set
button to start and stop the countdown.
If the countdown is running, the icon appears on the display. the icon
flashes once the countdown has reached zero.
7 resetting the countdown to the configured start value:
Press and hold the
Reset
button for three seconds.
Set Mode 1
Mode 2 Reset
Lap
Set
Mode 2 Reset
Set Mode 1
Mode 2 Reset