Schumacher PI-100SL - Manual (Page 3)

• Use only 15-amp fuses.
• This device does not include an internal Ground Fault Circuit
Interrupter (GFCI). For GFCI protection, use a Coleman
Cable 02822 GFCI outlet.
WARNING: Handling the cord on this product or cords as-
sociated with accessories sold with this product, may expose
you to lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands after handling.
BEfORE USING PI-100SL POWER INVERTER
It is important to know the continuous wattage of the device
you plan to use with the inverter. The PI-100SL must be used
with devices drawing 100 watts or less. If the wattage is not
marked on the device, an estimate can be made by multiply-
ing the AC input current (Amps) by the AC voltage (110V).
Devices like TVs, fans or electric motors require additional
power to start (commonly known as the “starting or peak
power”). The PI-100SL can supply a momentary surge in
wattage; however even devices rated less than the maximum
100 watts can exceed the inverters surge capability and
cause an automatic overload shutdown.
Make sure the device you are using is compatible with a
modified sine wave inverter.