Schumacher PI-100SL - Manual (Page 2)

2
IMPORTANT SAfETy INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Before using your PI-100SL, read and understand this
Owner’s Manual.
• Keep the inverter well ventilated in order to properly dis-
perse heat generated while it is in use. Make sure there
are several inches of clearance around the top and sides
of the inverter. Do Not block the slots of the inverter.
• Make sure the inverter is not close to any potential source
of flammable fumes, gases or clothing.
• Keep the inverter dry.
• DO NOT allow it to come into contact with rain or moisture.
• DO NOT operate the inverter if you, the inverter, the device
being operated or any other surfaces that may come in
contact with any power source are wet. Water and many
other liquids can conduct electricity, which may lead to
serious injury.
• Do not place the inverter on or near heating vents, radia-
tors, other sources of heat or flammable materials.
• Do not place the inverter in direct sunlight. The ideal air
temperature for operation is between 50° and 80°F.
• Do not use near open engine compartment.
• Only connect the power inverter to a 12-volt accessory
outlet or 12-volt airplane power outlet. Make sure the AC
plug and/or USB connection is tight.
• Do not modify the AC or USB receptacle in any way.