Antec DARK FLEET DF-30 - Manual (Page 27)

27
4.2 T OP 140 MM T WO C OOL ™ F AN
The DF-30 comes with one 140mm TwoCool™ LED fan. This fan has a two-speed switch that lets you
choose the speed best suited to your need and a switch to turn on or off the LED. These switches are located
at the rear of the case. The default fan speed setting is Low.
140 MM F AN S PECIFICATIONS :
Size: 140 x 25 mm two-speed fan
Rated Voltage: 12V DC
Operating Voltage: 10.8V ~ 13.2 V
Speed
Input
Current
Air Flow Static Pressure Noise
Input
Power
High
1200RPM
0.3A
1.7m³ / min
(58.9 CFM)
0.8 mm-H
2
O
(0.03inch-H
2
O)
26 dBA 3.6 W
Low
800RPM
0.2A
0.95m³ / min
(33.6 CFM)
0.28 mm-H
2
O
(0.01inch-H
2
O)
21.8 dBA 2.4 W
4.3 F RONT 120 MM B LUE LED F ANS
The DF-30 comes with two white 120 x 25 mm white LED fans which are pre-installed in front of each Fleet-
Release™ access door to cool the hard drives. These fans are installed so that air will be blown into the case.
Each fan comes with a speed control knob at the front of the faceplate. Turn the knob clockwise to increase
the speed. The lowest speed is 1200 rpm while the highest speed is 2000 rpm.
120 MM BLUE LED F AN S PECIFICATIONS :
Size: 120 x 25 mm speed control fan
Rated Voltage: 12V DC
Operating Voltage: 10.8V ~ 13.2 V
Speed
Input
Current
Air Flow Static Pressure Noise
Input
Power
Highest
2000RPM
0.3A
1.89m³ / min
(66.60 CFM)
2.55 mm-H
2
O
(0.1inch-H
2
O)
34.5 dBA 3.6 W
Lowest
1000RPM
0.15A
0.94m³ / min
(33.30 CFM)
0.637 mm-H
2
O
(0.03inch-H
2
O)
19.45
dBA
1.8 W
Turn this knob to adjust the fan.