Antec DARK FLEET DF-30 - Manual (Page 18)

18
2.6 E XTERNAL 3.5” D EVICE I NSTALLATION
There is one external 3.5” drive bay under the 5.25” drive bays.
Remove this drive bay cover.
1. Carefully remove the 3.5” drive bay cover from the bezel. Load the drives from the front, lining them
up to the front of the drive cage.
Insert your drive as shown.
2. With one hand supporting the drive, fasten the drive with the screws provided.
3. Find a small 4-pin white connector on the power supply and connect it to the male 4-pin connector
on the floppy drive.