Antec DARK FLEET DF-30 User Manual
Page 12
12
2.2
M
OTHERBOARD
I
NSTALLATION
Before proceeding:
-
Check the manual for your CPU cooler to find out if there are steps you must do before installing the
motherboard
-
Make sure you have the correct I/O panel for your motherboard. If the panel provided with the case isn’t
suitable, please contact your motherboard manufacturer for the correct I/O panel.
Make sure you have the correct I/O panel. This mismatched I/O panel
can cause difficulties down the road.
1. Lay the case down, with the open side facing up. The drive cages should be visible on the right side of
the case, with the power supply in the upper left.
2. Now insert your motherboard, aligning your motherboard with the standoff holes and remember
which holes are lined up.
Installing the motherboard, step 2. Note that not all motherboards will match with
all the provided holes; this is normal and won’t affect functionality.