MBRP S5406 - Manual (Page 3)

S5406 © 03/13 PAGE 3 OF 4
Installation of MBRP Inc. Performance Exhaust:
1. Install the Driver Side Extension Pipe using one of the provided Gaskets
and existing hardware. Leave hardware loose enough for some adjustment.
Refer to Figure 5.
2. Slide a 2 ½” Clamp over the Extension Pipe and install it to the Driver
Side Front Pipe. Refer to Figure 6.
3. Slide the existing factory hanger onto the Extension Pipe and reattach to the
vehicle. Refer to Figure 6.
4. Install the Passenger Side Front Pipe using a Gasket and existing
hardware. Leave the hardware loose enough for adjustment.
Refer to Figure 7.
5. Slide two 2 ½” Clamps onto the Muffler and attach to the Passenger Side
Front Pipe and the Extension Pipe. Leave the 2 ½” Clamps loose enough for
some adjustment. Refer to Figure 8.
Figure 5
Figure 6
Figure 7
Figure 8