MBRP S5302 User Manual
Page 3

S5302 © 03/13
PAGE 3 OF 4
2. Install the Passenger Side Front Pipe reusing the existing
hardware. Leave the hardware loose enough for some adjustment.
Refer to Figure 5.
3. Slide 2.5” Clamps over the Passenger Side Front Pipe and the
Driver Side Front Pipe. Install the Mufflers onto the Driver Side Front
Pipe and then the Passenger Side Front Pipe.
Refer to Figure 6.
4. Slide a 2.5” Clamp over the outlet side of the driver’s side Muffler.
Position the Driver Side Over Axle Pipe and loosely attach it to the
Muffler. Install the Driver Side Over Axle Pipe hanger into the factory
rubber insulator. Refer to Figure 7.
5. Slide a 2.5” Clamp over the Driver Side Tail Pipe and install onto the
Driver Side Over Axle Pipe. Install the Hanger Assembly onto the
Driver Side Tail Pipe and install to the frame using the fastener
provided. Refer to Figures 8, 9 and Detail A on Page 1.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
- UT6001 (3 pages)
- UT2001 (3 pages)
- UT4001 (4 pages)
- UT8001 (4 pages)
- GM8427 (3 pages)
- GM8425 (3 pages)
- F2313 (2 pages)
- GM8424 (2 pages)
- S6028 (4 pages)
- S6110 (2 pages)
- S6014 (4 pages)
- S6168409 (2 pages)
- S6172409 (2 pages)
- S6210 (4 pages)
- S6132 (3 pages)
- S6002 (4 pages)
- S6122 (4 pages)
- S6106 (3 pages)
- S6006 (5 pages)
- S6162409 (2 pages)
- S6202 (3 pages)
- S6244 (3 pages)
- S6128 (3 pages)
- S6102 (3 pages)
- S6214 (4 pages)
- S6165AL (2 pages)
- S6164AL (2 pages)
- S6206 (4 pages)
- S6100 (3 pages)
- S6167 (3 pages)
- S6166 (3 pages)
- S6156 (2 pages)
- S6157 (2 pages)
- S6150PLM (1 page)
- S6150P (1 page)
- S6150 (4 pages)
- S6224 (3 pages)
- S6020PLM (1 page)
- S6200 (3 pages)
- S6212 (4 pages)
- S6285 (3 pages)
- S6126 (3 pages)
- S6020 (3 pages)
- S6116 (3 pages)
- S6004 (4 pages)