MBRP S5302 - Manual (Page 2)

S5302 © 03/13 PAGE 2 OF 4
TOYOTA TUNDRA
4.7L & 5.7L DOUBLE CAB STANDARD BED, CREW MAX
SHORT BED
Removal of stock system:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2. Remove hardware from stock extension pipes. Keep for
reinstallation. Refer to Figure 1.
3. Remove exhaust from rubber insulators. Refer to Figure 2.
4. Remove the exhaust from the rearmost hanger. Leave the rubber
insulators on the truck for installation. Refer to Figure 3.
Installation of MBRP Inc. Performance Exhaust:
1. Install the Driver Side Front Pipe reusing the existing
hardware and attaching the hanger to the existing rubber insulator.
Leave the hardware loose enough for some adjustment. Refer to
Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4