MBRP S5400 - Manual (Page 4)

S5400 © 12/07 PAGE 4 OF 4
6. Install and adjust the Exhaust Tip to suit. Using a 17mm wrench
tighten the lock bolt located on the Exhaust Tip. Refer to Figure 10.
7. Align the exhaust as required. Starting at the front of the exhaust,
tighten all clamps and connections.
8. Carefully position the ABS line to provide clearance to the exhaust.
Refer to Figure 11.
9. Check along the whole length of the exhaust system to ensure that
there is adequate clearance around the spare tire, fuel and brake lines
or any wiring. If any interference is detected relocate or adjust.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your MBRP Inc. performance exhaust system. We hope you enjoy your purchase.
Figure 10
Figure 11